Test Strategy
Define coverage, risks, cycle-time factors and production boundaries.
Automated Test Engineering Company
Từ kiểm thử phức tạp đến hệ thống sẵn sàng cho sản xuất
onTAP phát triển hệ thống kiểm thử tự động cho sản xuất điện tử, ô tô, truyền thông quang học, điện tử công suất và các ứng dụng công nghiệp, kết hợp chiến lược kiểm thử, phần mềm, phần cứng, đồ gá và thiết bị đo.
Test Software
Instrumentation Hardware Fixture
DUT Test Result Production / Data Hệ thống kiểm thử tự độngPhần mềm kiểm thửPhần cứng tùy chỉnhĐồ gá kiểm thửTích hợp hệ thống
What We Engineer
Từ yêu cầu kiểm thử đến hệ thống sản xuất
Chúng tôi tích hợp kỹ thuật kiểm thử dựa trên giao diện DUT, hạng mục kiểm thử, mục tiêu sản xuất và yêu cầu truy xuất dữ liệu.
Test RequirementTest StrategySoftware + HardwareFixture + InstrumentationIntegrationProduction Test
Software
Develop test flow, instrument control, data logging and reports.
Hardware
Design interface boards, control boards, relay matrices and signal simulation resources.
Fixture
Bring DUT positioning, probes, interlocks and operation into the system design.
Integration
Connect software, hardware, fixtures, instruments and automation into a production test system.
Solutions by Application
Giải pháp theo ngành
Khám phá các lĩnh vực giải pháp chính của chúng tôi. Nội dung kỹ thuật chi tiết hiện được cung cấp bằng tiếng Anh.
New Energy Vehicle / BMS Battery Management System
New Energy Vehicle BMS Automated Test Solution
An automated test solution for new energy vehicle BMS validation and production testing, covering high-voltage testing, CAN/LIN communication, functional testing, data acquisition, result judgment and traceability.
BMS functional test automationHigh-voltage testing and safety interlockCAN/LIN communication testing
Optical Communication / High-Speed Optical Module Manufacturing 800G Optical Module Automated Test System
An automated test system for 400G/800G high-speed optical module production testing, covering instrument control, fixture integration, parameter acquisition, result judgment, reporting and traceability.
Optical module test flow automationHigh-speed instrument coordination and data acquisitionFixture, interface board and cable harness integration
AC/DC / DC/DC / SMPS / Power Modules / Telecom Power Supply / UPS / Inverter / Automotive Power Electronics Power Electronics Automated Test Solutions
Automated test engineering solutions for AC/DC converters, DC/DC converters, SMPS, power modules and automotive power electronics, covering electrical performance, dynamic load, protection, isolation, burn-in and system integration.
Input voltage variation, line regulation, voltage sag and over/under-voltage behavior verificationOutput voltage, output current, load regulation, ripple and PARD testDynamic load test and load-change response capture
Wi-Fi / Bluetooth / NB-IoT / RFID / RF Modules / Antenna Amplifier / Automotive RF and V2X RF & Wireless Automated Test Solutions
Automated RF and wireless test solutions for Wi-Fi, Bluetooth, NB-IoT, RFID and RF-enabled products, covering RF measurement, path calibration, programming, functional validation and production test.
Transmit power measurement and calibrationReceiver sensitivity testFrequency and frequency-offset measurement/calibration
Electronics Manufacturing / PCBA Functional Test / Automated Assembly / Appearance Inspection / Display and Indicator Inspection Machine Vision Test & Inspection Solutions
Integrated machine vision test and inspection solutions for electronics manufacturing, including LED, display, appearance, dimension and position inspection combined with functional test and production automation.
LED color and brightness inspectionLCD dark pixel, bright pixel and color difference inspectionVerticality, horizontality, dimension, size and position inspection
AI Server / High-Performance Computing / Liquid Cooling System Manufacturing AI Server Motherboard and Liquid Cooling Automated Test Solution
An automated test solution for AI server, high-performance computing equipment and liquid cooling system manufacturers, covering AI server motherboard testing, GPU server testing, high-speed interfaces, power, power consumption, liquid cooling inspection, leakage, thermal control, burn-in testing and traceability.
AI server motherboard functional testingGPU server automated testingHigh-speed interface test integration
Engineering Capabilities
Năng lực tích hợp phần mềm, phần cứng và kỹ thuật kiểm thử
Phần mềm, phần cứng, đồ gá, đo lường và tích hợp được tổ chức thành một hệ thống kiểm thử sản xuất thống nhất.
Xem năng lực TEST SYSTEM
SOFTWARE HARDWARE FIXTURE
INSTRUMENTATION MEASUREMENT INTEGRATION Test Software
Test flow, instrument control, data and reports.
Test Hardware
Custom PCB, interface boards, matrices and embedded control.
Fixture Engineering
Manual, pneumatic, vacuum and automated fixture design.
Instrumentation
PXI, DMM, source, load, oscilloscope and communication resources.
Measurement & Calibration
Measurement, calibration and judgment flows around product test items.
System Integration
Connectivity, traceability, MES interfaces and production automation integration.
Featured Products
Sản phẩm và nền tảng kiểm thử
Giới thiệu các sản phẩm, mô-đun và nền tảng có thể tái sử dụng. Chi tiết kỹ thuật hiện được cung cấp bằng tiếng Anh.
Thông tin sản phẩm bằng tiếng AnhMass Interconnect Test Interface System
Test SoftwareInstrumentationFixtureDUTTraceability
Test product, module or platform engineering visual.Mass Interconnect Test Interface System
A Mass Interconnect test interface product platform for ICT, FCT, ATE and PXI test systems, covering Receivers, ITAs, signal modules, power modules, RF modules, contacts, accessories and VPC compatible cross-reference support.
A modular high-density interconnect platform for ICT, FCT, ATE, PXI and complex automated test systems.Addresses large-scale signal connection, test cable management and quick changeover between UUT and test resources.
RS485 Automated Test & Measurement Modules
A modular RS485 signal switching and measurement product series for automated test and measurement, including the M416 16CH MUX Module, S424 24CH Switch Module and A404 4CH Current MUX Module.
A modular signal switching and measurement product series for automated test and measurement systemsUses RS485 communication for multi-module expansion and distributed control
Thông tin sản phẩm bằng tiếng AnhSmart Fixture Counter
Test SoftwareInstrumentationFixtureDUTTraceability
Test product, module or platform engineering visual.Smart Fixture Counter
A smart product for Industry 4.0 test fixture lifecycle management, used for fixture usage counting, lifetime management, process data storage and ICT/FCT shop-floor digitization.
Counts test fixture usage to support fixture lifetime management and maintenance planningSupports USB, RS232, RS485 and IIC interfaces for integration with different test systems
ETS Embedded Test Platform
A modular embedded test platform for ICT, FCT, ATE and automated test systems, supporting PC control and standalone operation across control, acquisition, digital IO, relay matrix, signal generation, special function and communication modules.
ETS is a modular embedded test platform used to build underlying test resources for ICT, FCT, ATE and automated test systems.Standard module categories platformize control, acquisition, IO, relay matrix, signal generation, communication and special-function capabilities.
Engineering Evidence
Kỹ thuật kiểm thử được chứng minh qua dự án thực tế
Các số liệu trong case chỉ là ví dụ dự án, không phải thông số chung hay giới hạn năng lực của onTAP.
Case dự án bằng tiếng Anh
BMS FCT / EOL / Burn-In Automated Test System
Automated test system case for BMS functional test, EOL, burn-in, communication, ADC calibration and production traceability.
canlinrs485daisy-chain
Case dự án bằng tiếng Anh CVS High Voltage & High Current Automated Test System
Automated test case for current/voltage sensing modules covering high voltage, high current, ADC calibration, isoSPI and Daisy Chain communication.
i2cisospIdaisy-chainhigh-voltage
Case dự án bằng tiếng Anh Universal 4kW Power Supply Automated Test Equipment
Universal ATE case for multiple power supply products, with project scope covering 0–4kW, 0–320VAC, 0–800VDC and input, output, dynamic, protection, safety and burn-in tests.
acdchigh-voltageelectronic-load
Case dự án bằng tiếng Anh Universal ATE for Industrial I/O Cards
Universal multi-function ATE platform case for industrial I/O, sensor-control and power-related cards, covering analog, digital, communication, power, boundary scan, signal generation and switching resources.
analog-inputanalog-outputdigital-inputdigital-output
Why onTAP
Vì sao đội ngũ kỹ thuật hợp tác với onTAP
Software + Hardware
Test software, embedded control, custom PCB, instrument control and fixtures can be developed and integrated under one architecture.
Custom Test Engineering
Systems are defined around DUT interfaces, signal paths, coverage and production operation instead of a single device template.
Production-Oriented Design
Beyond test function, we consider operation, maintainability, changeover, traceability and cycle-time factors.
Local Engineering Support
Supports local communication, custom development, product selection and on-site engineering collaboration without unverified 24/7 claims.
Company Trust
Kỹ thuật dựa trên kinh nghiệm thực tế
Công ty được thành lập năm 2020. Đội ngũ kỹ thuật nòng cốt có hơn mười năm kinh nghiệm về kiểm thử tự động và thiết bị sản xuất.
Company Founded: 2020 Team Experience: 10+ Years Software Copyright / Utility Model Patent / Registered Trademark
Giới thiệu onTAP